-
![Advantages and disadvantages of POE]()
Advantages and disadvantages of POE
Polyolefin Elastomer (POE) is a soft thermoplastic polymer with properties between plastic and rubber. The elastomer is made from copolyvinyl and longer chains of alpha-olefin, such as octene or buten
2023/11/27 hooren
-
![What are the anti-UV additives?]()
What are the anti-UV additives?
UV Stabilizers (UV Stabilizers) are a class of chemicals used in plastics, coatings, fibers and other substances to reduce or prevent the aging of materials caused by UV exposure. They are able to abs
2023/11/27 hooren
-
![What are the top 10 plastics with the best UV and weather resistance]()
What are the top 10 plastics with the best UV and weather resistance
What plastic is good for UV resistance? Here are ten types of plastics that are better at UV and weather resistance:Polycarbonate (PC) : with excellent weather resistance and UV resistance, it is wide
2023/11/23 hooren
-
![PA6 and PA66 are the difference between nylon single 6 and double 6]()
PA6 and PA66 are the difference between nylon single 6 and double 6
PA6 and PA66 are two common types of polyamide (nylon) resins. The main differences between them can be boiled down to the following:Source of raw materials: PA6 is made from caprolactam (6-nylon) mon
2023/11/10 hooren
-
![Advantages and disadvantages of POM materials]()
Advantages and disadvantages of POM materials
POM (polyformaldehyde) is an engineering plastic, also known as polyethylene glycol formaldehyde ester. It has some advantages and disadvantages, as described below:Advantages:Good physical properties
2023/11/08 hooren
-
![The difference between PPSU and PP materials]()
The difference between PPSU and PP materials
PPSU (polyether sulfone polymer) and PP (polypropylene) are two different types of plastic materials that have different chemical structures and physical properties. Here are some of the main differen
2023/11/08 hooren
-
![HDPE,LDPE,LLDPE difference]()
HDPE,LDPE,LLDPE difference
HDPE (high density polyethylene), LDPE (Low density polyethylene) and LLDPE (linear low density polyethylene) are three different types of polyethylene plastics. The differences between them are mainl
2023/11/06 hooren
-
![Mold roughness grade]()
Mold roughness grade
The following are some common mold grain (skin grain) data tables to describe the texture characteristics of the mold surface:SPI skin standard (American Plastics Industry Association standard) :Skin
2023/08/16 hooren
