Advantages:

1. High strength: ABS plastic has a high strength, much higher than the strength of general plastics, with good impact resistance and rigidity.

Good wear resistance: ABS plastic surface hardness is high, good wear resistance. Good processability: ABS plastic is easy to process, can be made into complex shape parts by injection molding, extrusion and other processes, can be cut, drilling, welding, splicing and other processing.

Good chemical resistance: ABS plastic has good corrosion resistance to a variety of chemicals, and can be used to manufacture containers, pipelines and other chemical industry supplies.

2. ABS plastic This plastic raw material has a good dyeing performance. In other words, it can stain very quickly.

3. ABS plastic This plastic raw material is a very hard material, and because of this characteristic, this ABS plastic can be widely used in many industries and in many aspects.

4. ABS plastic This plastic raw material has another feature, that is, it is very not easy to burn, so relatively speaking, if this material is used, it will also bring you a safer feeling.

5. The impact strength is relatively high, the general material 20 is almost, the high impact resistance can reach 40, and the condition of -30℃ also has a good performance

6. The electroplating performance is better, of course, not all grades of electroplating are good, and the best general material is Chimei

7. Good processing performance, general material 220℃, 10kg melting finger 20 or so, 40 or 50, good injection molding. There are also melting fingers below 10, good extrusion

8. Easy modification, flame retardant, heat resistant, enhanced, alloy can be done

9. Large capacity, stable supply, low price 6. Good electrical performance 7. High gloss, the year to see the brand, some brand matte 8. Water resistance is better, seawater resistance is also better.

Cons:

1. Low thermal deformation temperature: The thermal deformation temperature of ABS plastic is relatively low, which is not suitable for use in high temperature environment.

2. It is difficult to withstand ultraviolet light: ABS plastic is easy to age and decompose, and it is easy to change color and yellow after long-term exposure to ultraviolet light.

3. High flammability: ABS plastic is easy to burn, burning will produce toxic gases, need to pay attention to safety.

4. Vulnerable to solvent corrosion: ABS plastic is easy to be corroded by organic solvents such as ketones and esters.

5. Poor weather resistance

6. The heat resistance is not too good, and the heat deformation temperature is only 80 degrees

7. Wear resistance is not good

8. Resistance to organic solvents is not very good, and some brands are better